Industrial Additive Manufacturing
3D Printing Services
TAKSA Industries provides industrial FDM 3D printing for functional engineering prototypes, composite layup moulds, factory assembly jigs, and end-use components. We print in engineering-grade rigid polymers—including Carbon Fibre-Reinforced Nylon—and industrial TPU elastomers.
Get a 3D Print Quote
Technical Specifications & Material Matrix
Our enclosed high-speed FDM system handles single-piece builds up to 300 × 300 × 300 mm, with larger geometries split and keyed for bonded assembly.
| Parameter / Material | Specification / Shore / Grade | Key Mechanical Advantage | Typical Engineering Use |
|---|---|---|---|
| Single-Part Build Volume | 300 × 300 × 300 mm | Enclosed heated-chamber stability | Large housings, moulds, and monolithic jigs |
| Carbon Fibre Nylon (PA-CF) | Chopped Carbon Fibre Reinforced Polyamide | High stiffness, heat resistance & low warpage | End-use drone mounts, robot brackets, layup tooling |
| ABS & PETG | Industrial Engineering Thermoplastics | Impact durability, chemical & thermal resistance | Functional enclosures, ducts, mechanical fixtures |
| TPU 95A & TPU 68D | Flexible (95A) & Semi-Rigid Tough (68D) Elastomers | Tear resistance, vibration damping & impact absorption | UAV vibration dampers, bumpers, seals, protective boots |
| PLA | High-Speed Prototyping Grade | Crisp dimensional detail & rapid turnaround | Fitment validation, CAD mockups, master patterns |
Engineering Print Customization
Load-Matched Perimeter & Infill Tuning
Unlike consumer print shops that use default settings, we customize wall loop counts (4 to 8+ perimeters), top/bottom shell thickness, and gyroid/cubic infill density (20% to 100% solid) around your part's stress paths.
Dual-Hardness TPU Elastomers (95A & 68D)
Choose TPU 95A for flexible gaskets, soft grippers, and camera vibration isolators, or specify harder TPU 68D for extreme impact-resistant skid plates, gears, and wear pads that never shatter.
Brass Heat-Set Inserts & Hybrid Assemblies
We install brass threaded heat-set inserts for repeatable machine-screw fastening and combine 3D-printed CF-Nylon joints with our carbon fibre tubes and sheets for complete hybrid assemblies.
Typical Engineering Applications
- Composite Moulds & Layup Patterns: Rapid, cost-effective female/male moulds for vacuum-bagged carbon fibre components.
- UAV & Robotics Functional Hardware: CF-Nylon motor mounts, GPS masts, electronics enclosures, and TPU 95A landing gear dampers.
- Factory Jigs, Fixtures & Gauges: Custom CNC clamping jaws, assembly alignment nests, and go/no-go inspection gauges.
- Pre-Production CAD Validation: Full-scale ergonomic and mechanical fitment prototypes prior to hard tooling investment.
Ordering Information & How to Specify
Our automated CAD mesh analysis calculates exact part volume and print time directly from your 3D file. Include the following details when requesting a quote:
| Requirement Item | What to Specify | Notes |
|---|---|---|
| 3D CAD File | STEP (.stp) or high-resolution STL (in millimetres) | STEP files are preferred for accurate cylindrical holes and mating surfaces. |
| Material Selection | CF-Nylon, ABS, PETG, PLA, TPU 95A, or TPU 68D | Select "Need Engineering Recommendation" if you want us to advise. |
| Mechanical Duty | Visual fit-check, moderate load, or heavy structural load | Determines wall perimeter count, print orientation, and infill percentage. |
| Quantity & Post-Processing | Unit count, support removal, or threaded inserts | Turnaround time is confirmed immediately after mesh volume review. |
Frequently Asked Questions
What is the difference between TPU 95A and TPU 68D?
TPU 95A is a medium-soft flexible rubber-like material ideal for vibration dampers, seals, and flexible boots. TPU 68D is a much stiffer, semi-rigid structural elastomer designed for high-impact bumpers, rollers, and protective skids that require extreme toughness without brittle failure.
When should I choose Carbon Fibre Nylon over standard ABS or PETG?
Choose Carbon Fibre Nylon (PA-CF) for end-use structural brackets, drone parts, and high-temperature jigs where maximum stiffness-to-weight ratio, heat deflection stability, and a matte engineering finish are required.
Can you print parts larger than 300 × 300 × 300 mm?
Yes. For parts exceeding our single-piece 300 mm build cube, we split the CAD model with interlocking dovetail or dowel joints and bond the sections together with structural epoxy.
Should I upload an STL or a STEP file?
We accept both, but STEP files are recommended for engineering components because they preserve true mathematical curves and allow our team to verify critical hole tolerances before slicing.
Have a 3D Model Ready for Printing?
Upload your STEP or STL file and specify your material for a fast volume and lead-time quotation.
Get a 3D Print Quote